Additives

Additives

Additive Fiberline Composites

“Additives” is a general term used for agents which are added to the matrix. Depending upon their purpose, additives can be divided into three fundamental groups: price-reducing additives, process-related additives and function-related additives. While the purpose can vary, additives will always influence the corrosion resistance of profiles, as well as their mechanical and fire-technical properties.

Process-related additives
Process-related additives are substances that have beneficial effects on the pultrusion process and on the properties and appearance of a cured profile. One example is the “low-profile additive” used to avoid excessive shrinkage during curing of profiles. The additive prevents formation of hair-line cracks in surfaces, while increasing profile resistance to corrosion and improving fatigue properties. It also gives profiles more exact geometric tolerances and lower internal stress.

Function-related additives
Function-related additives have a beneficial effect in relation to the use of a finished profile. One example is the adding of pigments. Adding of fire retardants is another example. The latter are added to obtain self-extinguishing properties and to retard flame spread.

Of course, function-related additives can also be added in amounts so large as to degrade the mechanical properties of a profile.

See also the Fiberline Quality Codex on page 0.10-0.11 of the Fiberline Design Manual.

Price-reducing additives*
The sole function of price-reducing additives is to fill out the form of a profile, and adding such additives enables reduction of more expensive reinforcement and matrix materials. It is thus possible to reduce the price of the finished profiles accordingly. Profiles have significantly poorer mechanical properties when the amount of reinforcement is reduced. Moreover, most types of price-reducing additives also result in profiles with lower corrosion resistance and diminished resistance to most chemicals.

*Often referred to as “fillers”.


 

Share