Delivery in Europe Advice and customer service - Tlf: +45 76327779
You have no items in your shopping cart.

Lay light facade

Lay Light™ facade profiles are both translucent and non-reflecting. In the translucent profile the reinforcement is clearly visible, which creates a dynamic architectural interplay.


  • High stiffness and low weight
  • Planks with large lenths or units up to 15 m
  • High weather resistance
  • Surface structure gives unique appearance


The facade plank can be mounted both horizontally and vertically and used as a ventilated building envelope.
You are welcome to ask for our assembly instructions.


Surfaces: Coating UV protected, gloss according to own choice. The standard gloss is 30-35.
Standard: colour Natural
Special colours: On enquiry
Patina: Lay Light is a fibreglass product coated with translucent UV-lacquer, which must be expected to change over time. This patina has no effect on the construction or durability of the product.


Standard width 500 mm
Lengths Standard 6000 mm, up to 15.000 mm on enquiry
Profile height 40 mm
Weight 4.1 kg / m, 8.2 kg / m2
Tolerances: Fiberline Standard


Fire resistance B s3, d0 (EN 13 501)
B1 (DIN 4102 and ÖNORM 3800)
Class 0 (BS 476)
Longitudal expansion Approx. 4 mm / 6 m
Horizontal expansion Approx. 2 mm / m
Service temperature -20 to +80 °C
Test The profiles are tested by CSTB (Centre Scientifique et Technique du Batiment, Paris)
For wind load (up to 6.539 Pa), fatique, earthquake, an impact (among others according to hailtest VKF No. 26 247, class HW5/HW5)

Find out more at