angle-profile-for-300mm-fiberline
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile

Accessories for profiles 90° for 300 mm bracket

Item no. 163004
€ 53.00
excl. VAT

The brackets are used for corner and T-joints of I and U profiles, where they are subjected to tensile and compressive forces, bending moment and shear.

The brackets are designed for efficient assembly and load transmission. The brackets can transmit a greater shear force than the profile. This simplifies the sizing of the assembly.

Material: The brackets are made of acid-resistant stainless steel (1.4404 / AISI 316L) and are delivered pickled for maximum durability.

Number of holes: 12. The holes are over-dimensioned by 1.0 mm in relation to the bolt.

The brackets fit the profile heights 300 mm

Items in stock: 34

1-5 days


Description

The brackets are used for corner and T-joints of I and U profiles, where they are subjected to tensile and compressive forces, bending moment and shear.

The brackets are designed for efficient assembly and load transmission. The brackets can transmit a greater shear force than the profile. This simplifies the sizing of the assembly.

Material: The brackets are made of acid-resistant stainless steel (1.4404 / AISI 316L) and are delivered pickled for maximum durability.

Number of holes: 12. The holes are over-dimensioned by 1.0 mm in relation to the bolt.

The brackets fit the profile heights 300 mm

Combining advantages

CE marking

Our products have a number of international and highly sought-after certifications, among other, within the construction, offshore and railway sectors. This is your guarantee of consistently high quality every time you buy from us and use our products.

Low weight

Fiberline's GRP profiles are low in weight. This makes them easier to work with and means that great weight savings can be achieved on the finished structure.

Great strength

Fiberline Building Profiles give you the same great strength as steel, but at only a quarter of the density. It is also possible to make weight savings in comparison with aluminium, as the density is 30 % lower.

Corrosion-free

Our fibreglass profiles are resistant to aggressive chemicals, and liquids. This makes them ideal for wastewater treatment plants, swimming pools, cooling towers and construction, where there is a risk of corrosion.

Chemical resistance

Our fibreglass profiles are resistant to aggressive chemicals, liquids and alkalis. This makes them ideal for wastewater treatment plants, swimming pools, cooling towers and construction, where there is a risk of corrosion.

Electrical insulation

Fiberline's GRP profiles provide electrical insulation and minimise the complexity of earthing. This makes our profiles a future-proof choice where the costs of both installation and future inspections can be reduced considerably.

Easy to work with

GRP profiles are just as easy and fast to work with as timber. This means that solutions which incorporate our profiles can be installed easily on site or adjusted to fit existing components, such as piping systems, etc.

Thermally Insulating

Fiberline's fibreglass profiles have a significantly lower heat distribution gradient than steel and aluminium, enabling energy-efficient end products.

Minimal maintenance

Our GRP profiles have unrivalled durability and a long life, even in demanding conditions.

Sustainable

Fiberline's fibreglass profiles are produced using an energy-optimised process that takes the environment into consideration.