accessorie-90°-bracket-for-120-mm
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile
image-of-90-degree-bracket-holding-up-gfr-i-profile

Fyrkantsrör Accessories for profiles 90° for 120 mm bracket

Varunumr. 161204
€ 38.36
exkl. MOMS

The brackets are used for corner and T-joints of I and U profiles, where they are subjected to tensile and compressive forces, bending moment and shear.

The brackets are designed for efficient assembly and load transmission. The brackets can transmit a greater shear force than the profile. This simplifies the sizing of the assembly.

Material: The brackets are made of acid-resistant stainless steel (1.4404 / AISI 316L) and are delivered pickled for maximum durability.

Number of holes: 8. The holes are over-dimensioned by 1.0 mm in relation to the bolt.

The brackets fit the profile heights 120 mm

Varor i lager: 42

4-10 dagar


Inte medlem än?

Se personliga priser, skär i storlek & se orderhistorik.

Begäran om inloggning

Beskrivning

The brackets are used for corner and T-joints of I and U profiles, where they are subjected to tensile and compressive forces, bending moment and shear.

The brackets are designed for efficient assembly and load transmission. The brackets can transmit a greater shear force than the profile. This simplifies the sizing of the assembly.

Material: The brackets are made of acid-resistant stainless steel (1.4404 / AISI 316L) and are delivered pickled for maximum durability.

Number of holes: 8. The holes are over-dimensioned by 1.0 mm in relation to the bolt.

The brackets fit the profile heights 120 mm

Kombinera fördelar